Easy Jtag Emmc Plus V2.0.2.0 Setup Download | Easy Jtag Setup V2.0.2.0 Download

Table of Contents

In this Article we will explain all about Easy Jtag Setup v2.0.2.0 Download. Easy Jtag Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces. Z3X Easy Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

Easy Jtag Setup v2.0.2.0 Download

Easy JTAG Update v2.0.2.0 Released. Lot of new inside.

Added via JTAG:

PRESTIGIO PAP5300 (Read/Write/JTAG_PINOUT/Dump/one click repair)

Adde via Direct EMMC(ISP)

ALCATEL ONE TOUCH (IDOL) 6030X (Read/ Write/ EMMC_direct_pinout/Dump)
SAMSUNG GT-I9158 (Read/ Write/ EMMC_direct_pinout/Dump)
SAMSUNG GT-S7568 (Read/ Write/ EMMC_direct_pinout/Dump)
HUAWEI MEADIAPAD 7 (Read/ Write/ EMMC_direct_pinout)
ASUS ZENFONE 6 (Read/ Write/ EMMC_direct_pinout)
ACER A200(Read/ Write/ EMMC_direct_pinout)
LG G3 F460(Read/ Write/ EMMC_direct_pinout)

SD Unbrick CARD repaid new ZBIN:

GT-I9506_I9506XXUAMHD_GPT_UEFI_4.2.2.zbin
GT-I9295_I9295XXUBML3_GPT_UEFI_4.2.2.zbin
GT-I9295_I9295XXUCNF1_GPT_UEFI_4.4.2.zbin

EMMC FIRMWARE UPDATE:

New FIRMWAREs:

KMV3W000LM-B310 [V3W00M] (VMX0 CONTROLLER)
KMS5X000KM-B313 [S5XKMB] (VPX0 CONTROLLER)
KLMAG2GE4A-A001 [MAG2GA]

NEW EMMC TP PINOUTS uploaded to support :

eMMC_TP_TYPE_5.jpg
eMMC_TP_TYPE_6.jpg
eMMC_TP_TYPE_7.jpg
eMMC_TP_TYPE_8.jpg

Z3X Easy Jtag Plus Outstanding Features:

One click device repair
Boot repair
Data recovery
eMMC firmware repair
Partition management
eMMC service operations
SPI memory programming

Z3X Easy Jtag Plus Hardware Features:

Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
Updated power management subsystem – full digital PWM with ADC control
Added Micro-USB connector (if additional power required)
Added VCC and VCCQ switch with overcurrent protection
Updated USB device interface: USB 2.0 480 Mbps (high speed)
Integrated ISP engine: Z3X high power pro engine (4 MB/s)
ISP support 1 and 4 bit* connection
Added eMMC 8-bit high-speed interface up to 42 MHz
Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
Integrated M-PHY* interface
Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
Integrated self-test core that excludes 90% faults in production
Integrated CCID card reader for Z3X Software Use

Z3X Easy Jtag Plus Hardware Benefits:

Box to Host PC speed increased up to 40 MB/sec
JTAG Interface speed increased by 20%
eMMC 1 Bit ISP Speed increased up to 4 MB/sec
eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
eMMC 4 Bit Speed up to 18 MB/sec
eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
Compatible with 99% host PC systems and OS
Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
Compatibility with most of the popular eMMC sockets (with supplied adapters)
Plug and Play for Windows OS 8/ 8.1/10

Easy Jtag Plus eMMC Socket Features:

Made from high quality materials
Over 10K cycles of lifetime performance
Support for a wide range of eMMC ICs
High-speed up to 40 MB/sec through 8-bit bus
EMI resistant design, low noise components
Integrated power logic (no need for additional power source)
Surge protection – smart fuse driven (0.5A threshold)

Easy Jtag Plus Box Supported OS:

XP, Vista, 7, 8, 10, 11; 32-bit

Z3X Easy Jtag Plus Full Set Package Content:

Z3X Easy-JTAG Plus Box Hardware
Z3X preactivated card with EasyJTAG PLUS Activation
Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
USB A-B cable
Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)

Easy Jtag Plus Classic Suite 3.8.0.4

eMMC FFU Added and Updated for following IC chips:

KLM4G1FE3B-B001
KLM8G1GEAC-B031
KLM8G1GEND-B031
KLM8G1GETF-B041
KLM8G1WE4A-A001
KLMAG1JENB-B031
KLMAG1JENB-B041
KLMAG2GE2A-A001
KLMAG2GE2A-A002
KLMAG2GEAC-B001
KLMAG2GEAC-B002
KLMAG2GEAC-B031
KLMAG2GEND-B031
KLMAG2JENB-B041
KLMAG4FE4B-B002
KLMAG4FEJA-A001
KLMAG4FEJA-A002
KLMBG2JENB-B041
KLMBG4GE2A-A001
KLMBG4GEAC-B031
KLMBG4GEND-B031
KLMBG4WEBC-B031
KLMBG8FE4B-B001
KLMCG4JETD-B041
KLMCG8GE4A-A001
KLMCG8GEAC-B001
KLMCG8GEND-B031
KM3H6001CA-B515
KMDH6001DM-B422
KMF5X0005A-A210
KMFE10012M-B214
KMFN10012A-B214
KMFN10012M-B214
KMK8X000VM-B412
KMK8X000VM-B412
KML5U000HM-B505
KML7U000HM-B505
KML7U000HM-B505
KMN9W000RM-B205
KMQ310006A-B419
KMQ31000SM-B417
KMQ310013M-B419
KMQ310013M-B419
KMQ7X000SA-B315
KMQ8X000SA-B414
KMQE10013M-B318
KMQE60006M-B318
KMQE60013M-B318
KMQN10006M-B318
KMQN1000SM-B316
KMQN1000SM-B316
KMQN1006B-B318
KMQNW000SM-B316
KMR310001M-B611
KMR3100BA-B614
KMR4Z0001A-B803
KMR8X0001M-B608
KMV2W000LM-B506
KMV3W000LM-B310

Easy Jtag Emmc Plus V1.6.6.0 Fix (Latest 25.11.2023)

eMMC 5.1 Factory Firmware Update For

KLM8G2YE4C-C001
KLMBG2JETD-B041
KLMCG2KETM-B041
KLMCG2UCTA-B041
KMDH6001DA-B422
KMGD6001BM-B421
KMJ5X000WM-B413
KMK5U000VM-B309
KMK8X000VM-B412
KMKYL000VM-B603
KMNJS000ZM-B205
KMQ310013M-B419
KMQE60013M-B318
KMDD60018M-B320
KMDD60018M_B320
KMDP60018M_B425
KMFE60012M-B214
KMFN10012M-B214
KMFN60012M_FN62
KMFN60012M_FN62
KMFNX0012M-B214
KMGD6001BM-B421
KMQ310013B-B419
KMQ72000SM-B316
KMQ820013M-B419
KMQX10013M-B419
KMR4Z0001A-B803
KMR820001M-B609
KMRC10014M-B809
KMRE1000BM-B512
KMRNW0001M-B509

UFS Field Firmware Update added

MICRON-128GB-UFS-MT
SAMSUNG-KLUDG4U1EA-B0C1
SAMSUNG-KLUDG8V1EE-B0C1
SAMSUNG-KM2B8001CM-BB01
SAMSUNG-KM5V7001DM-B621
SAMSUNG-KM8B8001JM-BC01
SAMSUNG-KM8F8001JM-B813
SAMSUNG-KM8F8001MM-B813
SAMSUNG-KM8V7001JM-B810
SAMSUNG-KM8V8001JM-B813
SKhynix-H28S7Q302BMR_A002
SKhynix-H28S8Q302CMR
SKhynix-H28U62301AMR_D003
SKhynix-H28U74303AMR_D003
SKhynix-H9HQ16AECMMDAR
SKhynix-H9HQ16AFAMMDAR
SKhynix-H9HQ53ACPMMDAR
SKhynix-H9HQ53AECMMDAR
TOSHIBA-THGAF8G9T43BAIRB

Easy Jtag Emmc File Manager V1.18

Added CSD patch wile uploading new firmware

Added new eMMC FFU files:

KLMBG4WEBD-B031
KLMCG2UCTA-B041
KLMCG8WEBD-B031
KMDP6001DA-B425
KMGP6001BM-B514
KMRX60014M-B614
KLM4G1YE4C-B001
KMF720012M-F722
KMFE60012M-B214
KMR4Z0001A-B803
KMRNW0001M-B503

Easy Jtag Plus Setup Download :

Also see other eMMC Service Tools :

FAQ :

Q1. What is a Easy JTAG Plus ?

Answer : Easy Jtag Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces.

Q2. What is the benefit of Easy JTAG Plus ?

Answer : Easy Jtag Plus Box is costly eMMC Service Tool in the market, work with phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols. NAND, SPI interfaces. security.

Q3. Easy JTAG Plus full set price ?

Answer : Easy JTAG Plus stock is facing worldwide shortages also price note fix but check on our online Store.GsmClinic.com

Q4. Easy JTAG Plus Setup latest version ?

Answer : Easy JTAG Plus setup latest version is Easyjtag eMMC plus v2.0.2.0 (25.01.2024).

Conclusion :

Easy Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols. Z3X Easy Jtag Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces. Easy JTAG Plus setup latest version is Easyjtag eMMC plus v2.0.2.0 (25.01.2024).

Easy Jtag Emmc Plus v2.0.2.0 Setup Download | Easy Jtag Setup v2.0.2.0 Download