OnePlus A5000 Frp Removed by UMT Dongle

OnePlus A5000 Frp Removed by UMT Dongle

UMT Dongle Work Logs :

Operation : Format FS
Checking for existing devices…Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM10)
Driver Info : Huawei Incorporated, qu_usb_serial.sys, 2.1.1.0
Connecting to phone…OK
Waiting for response…OK
Init Handshake Sequence…OK
Hardware ID : E1E00500 [8998] DB41702A
OPK_DATA : 8EF1BA9BCEF942981995FE1BCAFDD191A636A0590E64C211AD74CC849534857A
Initializing Protocol…OK
Using Auto Loader Selection [3]
Device may possibly not boot with this loader.
Preparing Loader…Done
Sending Loader [8998_003]…Done
Executing Loader…OK
Detecting Chip Type…OK
Hardware : MSM8996, UFS, 64 GB
LU Count : 6 [0x00D7D800] [0x00000400] [0x00000400] [0x00008000] [0x00100000] [0x00060000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 131072, Sector Size: 4096
Reading Partition Table…OK
Reading Device Information…OK
Device : OnePlus
Software : , 1902221944 [Fri Feb 22 19:53:34 CST 2019]
Android Ver. : 9
Patch Level : 2019-01-01
Preparing Data…Done
Formatting Userdata…Done
Resetting FRP Lock…….Done
Operation Finished.
QcFire Ver. 3.9

Here Is Video Tutorial :

DOWNLOAD Latest UMT Dongle Setup

Social Share: