OPPO A37f Frp Lock | Pattern Lock | Phone Lock Removed by UMT Dongle
UMT Work Logs :
Operation : Format FS
Checking for existing devices…Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM600)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.2
Connecting to phone…OK
Waiting for response…OK
Init Handshake Sequence…OK
Hardware ID : E1507000 [8916] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A26AB1B4B3F1CF9E
Initializing Protocol…OK
Using Auto Loader Selection [1]
Preparing Loader…Done
Sending Loader [8916_014]…Done
Executing Loader…OK
Detecting Chip Type…OK
Hardware : 8916, eMMC, 16 GB
LU Count : 1 [0x01D1F000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 16384, Sector Size: 512
Reading Partition Table…OK
Reading Device Information…OK
Device : OPPO A33f [msm8916]
Software : A33fEX_11_170531, eng.root.20170531 [Wed May 31 19:14:23 CST 2017]
Android Ver. : 5.1.1
Patch Level : 2017-04-01
Preparing Data…Done
Formatting Userdata…Done
Resetting FRP Lock……Done
Operation Finished.
QcFire Ver. 3.5