Kult 10 Firmware Read by Infinity CM2

Kult 10 Firmware Read by Infinity CM2

Logs :

Operation : Read Flash [ v1.58 ]

1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey

Wait for phone…
Phone found! [ 4 ]
Sync…
Inital Boot Ok!
BB_CPU_PID : 6735
BB_CPU_NME : [MediaTek] MT6735_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA …
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 484A019065324741A2D50705192490F4
Initialize Memory …
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x90 , OEM : 014A
[eMMC] : FLASH_INF : [HYNIX] , e2GA
[eMMC] : FLASH_CID : 90014A48414732650507D5A2F490B219
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003AB800000
[eMMC] : FLASH_UCP : 15032 MiB [eMMC 16 GiB]
DEV RID : 0xF83E5C23988D1561BAC66E02E9103FA9
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

Reading Flash Content now …

xGPT : Normalize settings Ok!

Brand : KULT
ProdName : 10
ProdModel : 10
Device : 10
AndroidVer: 5.1
MTKxCPU : MT6735
MTKxPRJ : ALPS.L1.MP3.V2_FUNWAY6735.65C.L1_P73

[Read Ok] : preloader_gionee6735_65c_l1.bin
[Read Ok] : lk.bin
[Read Ok] : boot.img
[Read Ok] : recovery.img
[Read Ok] : logo.bin
[Read Ok] : secro.img
[Read Ok] : tz1.img
[Read Ok] : tz2.img
[Read Ok] : system.img
[Read Ok] : cache.img
[Read Ok] : userdata.img

[ScatCFG] : MT6735 / V1.1.2 / gionee6735_65c_l1 / EMMC
Android Info saved
MAUI Meta DB saved
HWConfig Info saved
FW Size : 2064 MiB

How to Flash Stock or Custom Rom using SP Flash Tool :-

Step 1: Download and extract the firmware on your computer
Step 2: Open the SP Flash Tool and load the Scatter File from the firmware folder.
Step 3: Install the USB Driver (skip if drivers are alredy installed).
Step 4: Turn Off your SmartPhone
Step 4: Click on Firmware Upgrade/Download Button in the SP Flash Tool.
Step 5: Connect your phone to the computer using the USB Data Cable.
Step 7: Wait for Finish or Pass.

Important Notes: Take a Backup of your SmartPhone data before Flashing or Update Firmware as because during the Flashing process your personal data will be removed permanently

DOWNLOAD

Social Share: