Redmi Note 10S Edl Point | MI Note 10S Edl Point

In this Article we will explain all about Redmi Note 10S Edl Point / Edl Test Point. If your Redmi Note 10S runs on a Qualcomm Processor it will be able to use EDL Mode but not all Qualcomm processors can support EDL Pinout or EDL Test Point. Edl Point is also same like as Emergency Download Mode. EDL Point can be used to unlock Bootloader when your device bootloader is locked if unlockable. EDL Point is also used for phone’s Unlocking & Flashing.

Redmi Note 10S Edl Point | MI Note 10S Edl Point

 

How Redmi Note 10S EDL Point Work, Follow Steps:

1.Connect This 2 Test Point To Ground.
2.Run Advanced Frp Option in Miracle MTK Tab.
3.When First boot done Then Disconnect Test Point from Ground.
4.Wait for Finish.

Redmi Note 10S is based on Qualcomm Processor it will be able to support EDL Mode but not all Qualcomm Processors can support EDL Method. The Redmi Note 10S is an excellent smartphone from the XIAOMI Brand. If you are looking Redmi Note 10S for install the Stock ROM, Custom ROM, Unlock Bootloader, Flashing or Unlocking then you’ll require an EDL Mode. Also if your Redmi Note 5 Pro Phone stops working or for any reason the must Upgrade its Oprating Software (ROM) then we require EDL Point because without EDL Mode our phone cannot be linked to the PC, so we need a Redmi Note 10S Edl Point.

Redmi Note 10S Required Tools for EDL Mode ?

  1. PC or Laptop
  2. Tweezer or Soldering Iron Station
  3. Software Tool like Umt Dongle, Miracle Box, Mrt Dongle, Xiaomi Flash Tools, Etc.

Best Tool for Unlocking or Programming in Edl Mode ?

Where we can use Redmi Note 10S in Edl mode ?

There are 4 different methods to boot your Phone into EDL mode. Choose the one which is suitable for you :-

Method 1: Fastboot Mode

Turn off the device and boot into Fastboot mode. This can be done by pressing Volume Down (-) and Power buttons simultaneously until anything is placed on the screen. Now you need to connect the device with PC. Launch command prompt window from the Minimal fastboot folder and give the following command : fastboot oem edl

Method 2 : Using ADB

It is little bit similar to that of the above method. Here you need not to switch-off the device and boot into fastboot mode. Just connect the Mi Max with Windows computer using a standard USB cable and launch command prompt window from the folder where Minimal Fastboot files are located. Simply hold the shift key and then right click anywhere in the folder. From the various options, choose ‘Open Command Window from here’ and enter the command: adb reboot edl

Method 3 : Using Hardware keys

This is another method to boot Xiaomi Mi Max into EDL mode. Turn off the mobile and take a USB cable. Now connect one end of the cable to the PC port and leave the other end unconnected to the device. Now you need to press and hold Volume Up + Volume Down keys and then connect the other end of the USB cable with device. That’s the device will automatically boots into EDL mode.

Method 4 :  Using EDL Test Point

Remove Battery Connector and connect this 2 Test Point. When you connect handset your phone Qualcomm port will be show.

How  we can use Redmi Note 10S EDL Mode ?

  1. Xiaomi Phone Flashing Firmware or Upgrade
  2. Xiaomi Patter Lock or Screen Lock Removing
  3. Mi Account Removing
  4. Frp Lock Removing
  5. Mi Account Remove (only for old model not for latest model because MI Account related to Xiaomi server side so not done in EDL Mode)

How to Connect Redmi Note 10S to EDL Mode ?

  1. Disassemble Redmi Note 10S back cover first but be carefull.
  2. Remove Battery Cable (Battery is not needed in EDL Mode)
  3. Now use Tweezer or Soldering Iron Station to connect 2 Dot Circle Point.(Dot Point as shown in the above image)
  4. Connect the USB Data Cable to your Phone with PC or Laptop (Driver must be Installed).
  5. Now your phone has successfully entered EDL mode & you will detect the Qualcomm USB QDLodar 9008 port on your PC or Laptop
  6. Open Software Tool like Umt Dongle, Miracle Box, Mrt Dongle, Xiaomi Flash Tools, etc & perform what you want.

Here is Our Video Tutorial for how to use Redmi Note 10S Edl Point :

Subscribe our YouTube Channel for Free learning Mobile Repairing Training.

Also See other models EDL Pinouts.

Warning : This Article or Tutorial is Educational Purposes only & tested on many Redmi Note 10S, so Procedure has been Tried and Tested at your on risk. We are not responsible for any damages from this procedure if you are not a Technician. If you used this EDL Mode Method you could void the warranty on your phone because of Service Center Warranty Policy, so use it yourself at the risk of.

If you have any doubt’s related this post and you need to answer any questions about this topic, so please ask questions via comments we will reply soon. If you like out Article related this contain leave a comment for us and we’re happy to help you. You can also request or inquire for help with any other various phone on EDL Point so please please ask via comments we will try to post a article as soon as possible.

FAQ :

Q1. Whats is EDL Point/Edl Test Point ?

Answer : If your phone runs on a Qualcomm Processor it will be able to use EDL Mode but not all Qualcomm processors can support EDL Pinout or EDL Test Point. Edl Point is also same like as Emergency Download Mode. EDL Point can be used to unlock Bootloader  when your device bootloader is locked if unlockable. EDL Point is also used for phone’s Unlocking & Flashing.

Q2. How we can use EDL Mode ?

Answer : Edl Point using for Flashing, Upgrade, Patter Lock or Screen Lock Removing, Removing, Frp Lock Removing, Mi Account Remove (only for old model not for latest model because MI Account related to Xiaomi server side so not done in EDL Mode)

Q3. Where we can use Edl mode ?

Answer : There are 4 different methods to boot your Phone into EDL mode. Choose the one which is suitable for you like Method 1-Fastboot Mode, Method 2-Using ADB, Method 3-Using Hardware keys, Method 4-Using EDL Test Point.

Q4. Best Edl Tool for Unlocking or Programming ?

Answer : UMT Dongle, UnlockTool, Hydra Tool, Xiaomi Flash Tools, Avenger Tool, Miracle Box, MRT Dongle, Etc.

Conclusion :

In this post we explain all about Redmi Note 10S Edl Point /Edl Test Point why we use this feature in Redmi Note 10S. If your phone runs on a Qualcomm Processor it will be able to use EDL Mode but not all Qualcomm processors can support EDL Pinout or EDL Test Point. Edl Point is also same like as Emergency Download Mode. EDL Point can be used to unlock Bootloader  when your device bootloader is locked if unlockable. EDL Point is also used for phone’s Unlocking & Flashing.

Subscribe our YouTube Channel for Free learning Mobile Repairing Training.

Download Files :

Buy GSM Box & Dongles from Store.GsmClinic.com

Social Share:

Leave a Comment

Change Image

Exit mobile version