Easy Jtag Emmc File Manager Setup | Easy JTAG Plus Box

In this Article we will explain all about Easy Jtag Emmc File Manager Setup. Easy Jtag Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces. Z3X Easy Jtag Plus is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols.

easy jtag emmc file manager setup image 1.1

Easy Jtag Emmc File Manager Setup

easy jtag emmc file manager 1.25 image 1.2

Z3X Easy Jtag Plus Outstanding Features:

  • One click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Z3X Easy Jtag Plus Hardware Features:

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 in old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID card reader for Z3X Software Use

Z3X Easy Jtag Plus Hardware Benefits:

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10

Easy Jtag Plus eMMC Socket Features:

  • Made from high quality materials
  • Over 10K cycles of lifetime performance
  • Support for a wide range of eMMC ICs
  • High-speed up to 40 MB/sec through 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic (no need for additional power source)
  • Surge protection – smart fuse driven (0.5A threshold)

Easy Jtag Plus Box Supported OS:

  • XP, Vista, 7, 8, 10, 11; 32-bit

Z3X Easy Jtag Plus Full Set Package Content:

  • Z3X Easy-JTAG Plus Box Hardware
  • Z3X preactivated card with EasyJTAG PLUS Activation
  • Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
  • USB A-B cable
  • Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)

Easy Jtag Plus Classic Suite 3.8.0.6

eMMC FFU Added and Updated for following IC chips:

  •  KLM4G1FE3B-B001
  •  KLM8G1GEAC-B031
  •  KLM8G1GEND-B031
  •  KLM8G1GETF-B041
  •  KLM8G1WE4A-A001
  •  KLMAG1JENB-B031
  •  KLMAG1JENB-B041
  •  KLMAG2GE2A-A001
  •  KLMAG2GE2A-A002
  •  KLMAG2GEAC-B001
  •  KLMAG2GEAC-B002
  •  KLMAG2GEAC-B031
  •  KLMAG2GEND-B031
  •  KLMAG2JENB-B041
  •  KLMAG4FE4B-B002
  •  KLMAG4FEJA-A001
  •  KLMAG4FEJA-A002
  •  KLMBG2JENB-B041
  •  KLMBG4GE2A-A001
  •  KLMBG4GEAC-B031
  •  KLMBG4GEND-B031
  •  KLMBG4WEBC-B031
  •  KLMBG8FE4B-B001
  •  KLMCG4JETD-B041
  •  KLMCG8GE4A-A001
  •  KLMCG8GEAC-B001
  •  KLMCG8GEND-B031
  •  KM3H6001CA-B515
  •  KMDH6001DM-B422
  •  KMF5X0005A-A210
  •  KMFE10012M-B214
  •  KMFN10012A-B214
  •  KMFN10012M-B214
  •  KMK8X000VM-B412
  •  KMK8X000VM-B412
  •  KML5U000HM-B505
  •  KML7U000HM-B505
  •  KML7U000HM-B505
  •  KMN9W000RM-B205
  •  KMQ310006A-B419
  •  KMQ31000SM-B417
  •  KMQ310013M-B419
  •  KMQ310013M-B419
  •  KMQ7X000SA-B315
  •  KMQ8X000SA-B414
  •  KMQE10013M-B318
  •  KMQE60006M-B318
  •  KMQE60013M-B318
  •  KMQN10006M-B318
  •  KMQN1000SM-B316
  •  KMQN1000SM-B316
  •  KMQN1006B-B318
  •  KMQNW000SM-B316
  •  KMR310001M-B611
  •  KMR3100BA-B614
  •  KMR4Z0001A-B803
  •  KMR8X0001M-B608
  •  KMV2W000LM-B506
  •  KMV3W000LM-B310

Easy Jtag eMMC plus v1.6.6.0

eMMC 5.1 Factory Firmware Update For

  • KLM8G2YE4C-C001
  • KLMBG2JETD-B041
  • KLMCG2KETM-B041
  • KLMCG2UCTA-B041
  • KMDH6001DA-B422
  • KMGD6001BM-B421
  • KMJ5X000WM-B413
  • KMK5U000VM-B309
  • KMK8X000VM-B412
  • KMKYL000VM-B603
  • KMNJS000ZM-B205
  • KMQ310013M-B419
  • KMQE60013M-B318
  • KMDD60018M-B320
  • KMDD60018M_B320
  • KMDP60018M_B425
  • KMFE60012M-B214
  • KMFN10012M-B214
  • KMFN60012M_FN62
  • KMFN60012M_FN62
  • KMFNX0012M-B214
  • KMGD6001BM-B421
  • KMQ310013B-B419
  • KMQ72000SM-B316
  • KMQ820013M-B419
  • KMQX10013M-B419
  • KMR4Z0001A-B803
  • KMR820001M-B609
  • KMRC10014M-B809
  • KMRE1000BM-B512
  • KMRNW0001M-B509

UFS Field Firmware Update added

  • MICRON-128GB-UFS-MT
  • SAMSUNG-KLUDG4U1EA-B0C1
  • SAMSUNG-KLUDG8V1EE-B0C1
  • SAMSUNG-KM2B8001CM-BB01
  • SAMSUNG-KM5V7001DM-B621
  • SAMSUNG-KM8B8001JM-BC01
  • SAMSUNG-KM8F8001JM-B813
  • SAMSUNG-KM8F8001MM-B813
  • SAMSUNG-KM8V7001JM-B810
  • SAMSUNG-KM8V8001JM-B813
  • SKhynix-H28S7Q302BMR_A002
  • SKhynix-H28S8Q302CMR
  • SKhynix-H28U62301AMR_D003
  • SKhynix-H28U74303AMR_D003
  • SKhynix-H9HQ16AECMMDAR
  • SKhynix-H9HQ16AFAMMDAR
  • SKhynix-H9HQ53ACPMMDAR
  • SKhynix-H9HQ53AECMMDAR
  • TOSHIBA-THGAF8G9T43BAIRB

Easy Jtag Emmc File Manager V1.25

Added CSD patch wile uploading new firmware

Added new eMMC FFU files:

  • KLMBG4WEBD-B031
  • KLMCG2UCTA-B041
  • KLMCG8WEBD-B031
  • KMDP6001DA-B425
  • KMGP6001BM-B514
  • KMRX60014M-B614
  • KLM4G1YE4C-B001
  • KMF720012M-F722
  • KMFE60012M-B214
  • KMR4Z0001A-B803
  • KMRNW0001M-B503

Emmc File Manager 1.25 addon Released. Support new box HW.

Added:
– Qualcomm MELF Loaders support.
– New Android info types.
– Small bug fixes.
– Fixex build info.

Emmc File Manager 1.24 addon Released. Support new box HW.

Added:
– Sahara v3 Support.
– Connect to FireHose.
– Small Fixes.
– Multiple EasyJTAG Boxes HW setup support.

Easy Jtag Plus Setup Download :

Also see other eMMC Service Tools :

FAQ :

Q1. What is a Easy JTAG Plus ?

Answer : Easy Jtag Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces.

Q2. What is the benefit of Easy JTAG Plus ?

Answer : Easy Jtag Plus Box is costly eMMC Service Tool in the market, work with phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols. NAND, SPI interfaces. security.

Q3. Easy JTAG Plus full set price ?

Answer : Easy JTAG Plus stock is facing worldwide shortages also price note fix but check on our online Store.GsmClinic.com

Q4. Easy Jtag Emmc File Manager Setup latest version  ?

Answer : Easy Jtag Emmc File Manager Setup latest version is “Easy Jtag Emmc Manager V1.25

Conclusion :

Easy Jtag Emmc File Manager Setup is an innovative all in one service tool for phone and phone boot repair, data recovery, SPI memory programming and many other features. Supports eMMC, ISP, JTAG, SPI, NAND and much more protocols. Z3X Easy Jtag Plus is an all in one service tool for phone boot repair, data recovery, memory programming and many other features. Supports MMC, ISP, JTAG, NAND, SPI interfaces. Easy Jtag Emmc File Manager Setup latest version is Easy Jtag Emmc Manager V1.25

Social Share:

Leave a Comment

Change Image

Exit mobile version