How To Update Samsumg J710F By Z3X Samsung Pro Tool

How To Update Samsumg J710F By Z3X Samsung Pro Tool

Z3x Samsung Pro Tool Setup Download Here

Firmware Update Steps By Free Odin Program :

– Turn your phone off and remove Sim and Memory Card from it.
– Run Odin program and check the following options:
Auto Reboot – F.Reset Time

– From the Extracted Firmware package you have to select files in the following order to use in Odin program:

Bootloader:
PDA:
PHONE:
CSC:

– Now put the phone into Download Mode: Press Volume Down key + Home Key + Power Key.
– After you see the Warning message press Volume Up Key to enter Download Mode.
– Connect the phone to your PC via USB cable.
– If your PC starts installing drivers then wait till it is finished.
– Look at Odin’s window and make sure it detects the Com port that your phone takes:

If the phone’s drivers is installed correctly you will see 0:[COMxx] when xx is the com port number so everything is OK.

– Click Start button to let Odin downloads the selected firmware files into your phone.
– During the update process it is very risky to stop the program or remove USB cable from phone so let it done without any interruption.
– When the update process is done the phone will be rebooted.
– If you see PASS! word at Odin’s window then the update was successful.
– Disconnect your phone and wait till it is fully on.

Click Here For Download Odin

Click Here For Free Download & Support Section

Video Tuturial :

Social Share:
Exit mobile version