Infinity Chinese Miracle-2 SPD/UniSOC v2.05 – NAND, KaiOs and new features

As ordinary, unique functions and methods released

Core
NewChip : SC7731E with NAND ( KaiOS and MocorDroid5 )
NewChip : SC7715x with NAND ( KaiOS , MocorDroid5 , Android 4x)
NewChip : SC9820x with NAND ( MocorDroid5 , Android 4x)
Protocol : Speed increased for most operations ( SPD and UniSOC )
Protocol : Protocol changes according SPD/UniSOC R23 line

New Feature : NAND support ( SPD and UniSOC generation )
!* Support flashing Factory / InfinityFW
!* Support correct flash selection and servicing phones with NAND
!* Support InfinityFW reading ( Complete, Factory-Like )
!* Support Service operations

Service
Changed : Repair security procedure updated (Flash and Diag mode)
Changed : Identify procedure updated
!* Support complete and fast NAND devices identification
!* Support complete simlock info structure identify and verify
!* Support multi-nv structure detection and security info detection
!* Database update / self-learning updated
!* FileSystem identification support UBIFS and F2FS detection
Changed : Format FS / Reset FRP procedure updated

Firmware Reader
New Feature : NAND support
!* Support old and new generations ( SPD and UniSOC )
!* Support plain Android , KaiOs and MocorDroid5 OS
!* Automatic and correct FileSystem creation for NAND devices
!* Support all security types, include UniSoc secure/signed
!* Produced FW is 100% like factory one
Changed : FileSystem creation engine updated ( UBIFS support , bugfixes )
Changed : Improved structure identification
Changed : Support more different types
Changed : Old SPD line support rebuild ( SC7715,SC7731,SC983x,SC9820x )
Changed : Fixed FW creation in full manual / skip verify mode settings

Flasher
New Feature : Complete flash erase ( whole flash format ) during flashing ( eMMC / NAND )
New Feature : Correct NAND flashing support ( SPD and UniSOC ) ( Factory PAC and InfinityFW )
Changed : Flashing core for InfinityFW more stable

Loader Database
NewChip : SC7715 BASE NAND revisions included
NewChip : SC9820 BASE NAND revisions included
NewChip : SC7731E BASE NAND revisions included
NewChip : SC7731E BASE eMMC LOW_MEM revisions included ( cheap A8-A9 devices )
NewChip : SC7731x BASE eMMC LOW_MEM revisions included ( old A4-A5 GEA devices )

Other
Changed : Manual mode : automatic structure and setting detection in manual mode
Changed : Automatic base settings selection for BASE loaders ( Protocol, Charging, FlashSettings )
Changed : Separate NAND mode option activated in platform settings for manual mode
BugFix : Lot of minor changes and bugfixes
Changed : Software compatibility with other applications improved

Password for files: 12345678

Infinity CM2 Setup Download

What is Infinity-Box / Dongle

Infinity-Box Dongle contains the following software, hardware and support:

Software for GSM and CDMA models, see listof supported models *
World-famous “Chinese Miracle” software for MTK / MediaTek, etc.
World-famous “Chinese Miracle-2” software for MTK / MediaTek, SPD / Spreadtrum, RDA / Coolsand, etc.
Protection Smart-Card
USB Smart-Card reader
Support area access (software, flash files, drivers, manuals, updates, bug-fixes, etc.)
Smart-Card upgrade server access
Support via e-mail
Support forum access

Note! After 1 year it is necessary to renew access by means of activation.

Before using the box, please read the following instructions.

Infinity-Box Dongle – Features:

Well known GSM and CDMA brands / models supported
“Chinese Miracle” MTK based brands / models supported
Standalone software (no Internet connection required)
SP-decode: remove / clear network, provider locks
Set network, provider locks
Read codes
Flash read / write (high speed)
Write any part of Flash separately (firmware, customization, flex, map, file system (FFS), language pack)
Upgrade / downgrade firmware
Repair damaged IMEI
Remove / clear / read user / phone lock code
Reset to default / factory settings
Repair dead phones
Read Flash / EEPROM area backup
Repair software-related problems
Read codes: network, provider codes, user / phone code
Empty board flashing (for example, after flash chip replacement)
Format file system
SCAT files read / write
Create security zone backup during critical operations
“Smart write” option, together with high-speed option flashing speed may be extremely high
Detect keyboard codes by flash file (“Keyboard codes detector”)
Save operation process results in a Log file
Big flash files database for all World regions
Compact flash / EEPROM files format: flash / backup files internally packed and unpacked on the fly. That way you can save up to 50% of your Internet traffic (download small files from support area) and save a lot of disk space on your HDD
Counter for decode / flash / other operations
Easy to use brand / model selection via “Shell”
Easy access to cables / pinouts information via “Cable selector”
Easy access to support area via automatic logon system and “Support manager”
Huge flash files database: firmware, language pack, flex, map, repair EEPROM, FFS files, etc., more than 20,000 files for different models
Documentation and manuals with step-by-step instructions

Note: To avoid any misunderstanding please check list of available functions for each supported model, different models have more or less functions, because of hardware / software limitations!

“Chinese Miracle” module for MTK-based models – Features:

Automatic phone structure detection: this means that you can also service phones which is not shown in supported models list. Just find a pinout and make sure that your phone is based on MT62xx CPU and you will be able to flash / decode / repair this phone.
Repair dual-SIM (dual-CPU) models: work with Rx_A/Tx_A, Rx_B/Tx_B pinouts to repair firmware for both CPU
Repair IMEI for single-SIM and dual-SIM models with different methods (MT6205, MT6223 dual configurations supported too)
Repair IMEI for single SIM/CPU models
Repair master IMEI (SIM-1) for dual-SIM (dual CPU) models
Repair slave IMEI (SIM-2) for dual-SIM (dual CPU) models
Repair master IMEI (SIM-1) for dual-SIM (single CPU) models
Repair slave IMEI (SIM-2) for dual-SIM (single CPU) models
Repair slave IMEI (SIM-3) for triple-SIM models
Automatic memory size detection
Direct SP-decode phones with unknown firmware (auto-detection algorithm)
Decode user locked phones with unknown firmware (auto-detection algorithm)
Format file system: auto-detect FFS structure and size, backup FFS before format
Reset to defaults phones with unknown firmware (auto-detection algorithm)
Write / Read Flash for phones with unknown structure (auto-detection algorithm)
Write / Read EEPROM for phones with unknown structure (auto-detection algorithm)
Firmware version auto-detect
Automatic firmware version detection and save original firmware version information in Log file during flash / format
Language list auto-detect
Repair “Power-On problem” for MT6205, MT6208, MT6217, MT6218, MT6219, MT6223, MT6225, MT6226, MT6227, MT6228, MT6229, MT6230, MT6235, MT6238, MT6239, MT6253, MT6268 CPU based models after full flash without backup, erased flash, etc.
Repair / recalculate security area (five different security area types supported) to repair dead phones based on MT6223, MT6225, MT6226, MT6227, MT6228, MT6229, MT6230, MT6235, MT6238, MT6239, MT6253, MT6268 CPU
Upgrade / downgrade phone firmware
Remove / clear network, provider locks
Read codes: network, provider codes, user / phone code
Reset phone settings to defaults (factory state)
Empty board flashing (for example, after flash chip replacement)
Create security zone backup during critical operations
Repair software-related problems
Repair dead phones
“Flash File Manager”: easy access to firmware information such as internal firmware name, language names, keyboard codes
Touchscreen calibration (repair phones with damaged touchscreen)
Repair “No licensed to produce” fault
Repair “Bad Software” fault (latest MT6223, MT6225, MT6226, MT6227 based models)
Repair “Code CRC Check Error” fault
Detect language names inside flash file
Detect keyboard codes inside flash file (for service menu, etc.)
Detect firmware version by flash file
Detect existing languages by flash file
Detect keyboard codes by flash file (“Keyboard codes detector”)
Batch flash file rename, version detection, language detection, name conversion
Save operation process results in Log file
Huge and almost complete flash files database: firmware, repair EEPROM, FFS files, etc.
Estimated remaining flash read / write time indication
Documentation and manuals with step-by-step instructions

List of available options for several supported models.

* Developer provides support only for those phones which are on the list of supported. Not all servicing features can be applied to some supported models, due to difference of hardware / software versions. Complete list of supported models you can find on the official product page, or on the GSM forum.

How to Download:
– Download Infinity Box/Dongle Setup
– Connect Infinity Box/Dongle to PC.
– Run Infinity Software.
– Enjoy!