Emmc BGA 254 Isp Pinout

What is ISP Pinout ?

ISP means “In-System Programming”.In-System Programming (ISP) allows communication to take place with a target chip without the need to remove it. The main advantage of this method is the possibility to communicate with a target chip eMMC or eMCP bypassing the CPU. It brings higher speed for data extraction compared with JTAG but it requires great soldering skills. ISP applied to forensics, is the practice of connecting to an eMMC or eMCP flash memory chip for the purpose of downloading a device’s complete memory contents. 

What is ISP Pinout ?

eMMC and eMCP memory are the standard in today’s smartphones, and the ISP practice enables examiners to directly recover the complete data without removing the chip and destroying the device.ISP benefits the examiner who faces the challenges of tightening budgets, yet wants to expand their expertise in retrieving evidence from locked smartphones. A cost-effective technique, ISP provides examiners with the same results of a chip-off at a lower price-point. 

Why do we need ISP Pinout ?

Just Like “Joint Test Action Group (JTAG)” there are specific contacts that will be of interest to the examiner. But unlike JTAG, the contacts are directly off the chip BGAs and do not go through the processor. Acquires data much faster than JTAG, enabling examiners to process more phones faster. 

Important Pinouts :- 

-CMD -CLK -DATA0 -GND -VCC -VCCQ

Emmc BGA 254 Isp Pinout

Requirement Tools

1.Microscope 2.Miro Solder 3.Solder Paste 4.Copper Wire 0.1mm 5.Emmc Flash Box (Easy JTAG,Ufi Box,Medusa Pro,Etc)

How to Communicate with BGA 254 eMCP by this ISP Pinout

1.BGA Adapters 2.ISP Adapters

How to use BGA Adapters ?

To Program any IC in BGA adapter, first of all insert IC in BGA Adapter and then connect to Programming Device.

How to use ISP Adapters ?

Solder all contacts for ISP according to Pinout description. The soldering paste is very useful in this step because it helps easily solder 0.1mm copper wire to small soldering pads.